The most important process conditions in the
injection molding process are the temperature, pressure, speed and the corresponding individual action time that affect the plasticizing flow and cooling. These factors, in turn, influence and constrain each other, such as increasing the melt and mold temperature, it is possible to reduce the injection pressure and speed, etc., and vice versa, it is necessary to increase the injection pressure and speed.
The core of the influence of various process conditions lies in the change of plastic viscosity, which is crucial for the reasonable selection of parameters in the injection process and the influence of each other.
The following advantages exist for the use of high speed injection in the injection process.
Improving the flow of the plastic, which facilitates the molding of thin-walled parts.
Improving the surface gloss of the product.
The possibility of improving the strength of the fusion line, making the fusion pattern less obvious.
Preventing the generation of cooling deformation, etc.
The advantages of using low speed injection in the injection process include
Preventing the formation of flying edges on molded products.
Preventing the generation of jet lines and flow lines.
Preventing the production of burn marks.
Prevention of air entrapment in the plastic melt.
Prevention of molecular orientation deformation, etc.
The advantages of high-speed injection are also the disadvantages of low-speed injection, and vice versa. Therefore, the combination of high speed and low speed in the injection process can make full use of their respective advantages and avoid their respective disadvantages, thus ensuring the quality of the product and the economy of the process.
This is what we usually refer to as multi-stage injection technology, which has been commonly used in modern
injection molding machines. At present, most of the medium-sized
injection molding machines have five to six injection pressure, speed changes and three to four pressure-holding pressure changes (because the pressure-holding stage, the melt has been filled with cavity, the melt through the pressure-holding pressure into the cavity of the complementary shrinkage material has been limited, so the impact of pressure-holding speed is not significant).
Latest blog posts
Custom molds injection molding
Custom molds injection molding is a manufacturing process that involves creating custom molds to produce plastic parts. Injection molding is a popular technique used in various industries such as...
Plastic injection molding companies
Plastic injection molding is a manufacturing process that involves injecting molten plastic into a mold to create a wide range of plastic products. From car parts to medical devices and household items, plastic injection molding is used to create a variet
PET Preform Injection Moulding Machine
PET preform injection molding is a manufacturing process that is used to create PET (polyethylene terephthalate) preforms that can be later blown into bottles, jars, and other containers. This process...
You may like
What is the mold? What are the types of molds?...
Mold, various molds and tools used in industrial production to obtain required products by injection molding, blow molding, extrusion, die casting or forging molding, smelting, stamping and other methods. In short, mold is a tool used to make molded artic
30 common problems in the injection molding process and countermeasures
1.When the machine is first started, the product runs phi (flying edge), and after a period of production, the product lacks glue causes and solutions.
The melted glue in the...
Analysis of the causes of swelling, bulging and shock lines of injection molded products
Some plastic parts are swollen or blistered on the back of the metal insert or in particularly thick parts soon after molding and demolding. This is because the plastic not completely cooled...
How to solve the dent of injection molded parts?
Sometimes there is shrinkage and dent in the processed injection molded products, what is it? What are the causes of these situations?